Info
The Ventus-12 is a powerful, compact and easy to transport single 12" subwoofer.
The long excursion 12" chassis has a high power handling 4" voice coil. A low moving mass ensures an extremely precise and at the same time deep, dry bass reproduction. The large reflex port and high mechanical excursion give the bass excellent dynamics and effectiveness. The Ventus-12 provides a performance that one would not expect from a subwoofer of this compact size.
A removable wheel board can be attached to the front for easy transport. A protective cover protects the surface and ensures value retention.
The two large handles can be grasped from all sides, are in the centre of gravity and ensure comfortable handling.
Rubber feet and stacking troughs guarantee a secure stand without slipping. An M20 flange for distance rods is integrated.
Operation
- At any suitable amplifier with integrated DSP or upstream DSP controller or active analogue crossover. Filter values are freely available for individual adjustment. Limiter values can be adjusted by yourself.
- Plug&Play on Powersoft amplifiers with ready-to-use presets for Armonia Plus software.
- About the TENNAX (AllDSP) 19“ DSP-Controller with any suitable amplifier. Filter values are already set, limiter values can be adjusted by yourself (Limiter preset to 32 dB amp gain).
Technical Data
Drivers
1 x 12" woofer with 4" voice coil
Lower cut-off frequency
37 Hz (- 10 dB)
46 Hz (+/- 3 dB)
Impedance
8 Ω
Powerhandling (AES / program / peak)
1.000 W / 2.000 W / 4.000 W
Sensitivity 1 W/1 m
96 dB SPL (half space)
Sound pressure at (AES / program / peak)
126 dB SPL / 129 dB SPL / 132 dB SPL
Connection
2 x Neutrik NL4 IN/OUT 2+/- (4-pole looped-through)
Finish
Polyurea coating in RAL 9005
Dimensions / Weight
368 (H) × 480 (W) × 500 mm (D) / 27,1 kg
Accessoires
Transport cover for Ventus-12 (sp)
5T1121000
Transport cover for Ventus-12 (sp) made of stable Codura fabric with padding. All handles are cut out.
Detachable wheelboard for Ventus-12 (sp)
5T1124000
Detachable wheelboard to mount on Ventus-12 (sp). 15 mm wood, 2 x butterfly locks, 1 x handle, 4 x black wheels.
Telescopic rod
999921368
Telescopic rod with expanding mandrel system for play-free seating in the tripod base. Height: 110 to 180 cm. Max. load capacity: 35 kg.
Distance rod with crank
999921340
Distance rod for cranking with expanding mandrel system which provides a tight and firm fit for the speaker. Height: 92 - 152 cm. Max. load capacity: 50 kg.
Carrying bag for 2 x speaker stand/ rod
999920000
Carrying bag for two speaker stands or distance rods, also with crank. Two inside compartments with zipper and sturdy handles. Material waterproof nylon.
Cable Clip for speaker stand/ rod
999935000
The cable clip made of robust, durable ABS plastic is specially designed for speaker stands and distance rods with 35 - 36 mm tube. It adheres firmly to the tube and holds the cables securely and neatly in the 24 x 16 mm guide accessible from the outside.
speakON cable 0.5/1/3/6/10/15/20/30 m
80440XXX1
Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.
speakON adapter
999654669
Adapter to connect two speaker cables.
SP-Kit Ventus
2T0001000
Self-powered electronic installation unit with 3-channel Class-D amplifier and DSP module for subsequent conversion of all Tennax Ventus subwoofers to self-powered version.
Connection plate with waterproof PG thread cable gland
4T0005000
The angled Speakon connector panel can be exchanged e.g. for installation purposes outdoors against a connector plate with waterproof PG thread cable gland.
Connection plate with Phoenix-contact connector strip
4T0004000
The angled Speakon connector panel can be exchanged e.g. for installation purposes for a connection plate with Phoenix contact plug connector.
Phoenix Contact
997463649
Phoenix Contact 4 pol. as an alternative to the Neutrik NL4 Speakon IN/OUT.